LM3S316 Datasheet, PDF (18/421 Pages) List of Unclassifed Manufacturers – Microcontroller

Revision History
Revision History
This table provides a summary of the document revisions.
Date
May 2006
July 2006
October 2006
Revision
00
01
02
Description
Initial public release of LM3S301, LM3S310, LM3S315, and LM3S316 data
sheets.
Second release of LM3S301, LM3S310, LM3S315, and LM3S316 data sheets.
Includes the following changes:
• Added initialization and configuration content into PWM, I2C, Comparators,
and JTAG chapters.
• Modified MAXADCSPD bit description to show how to set speed lower.
• Clarified that peripheral clock must be set before enabling peripherals in
“Initialization and Configuration” sections.
Third release of LM3S301, LM3S310, LM3S315, and LM3S316 data sheets.
Includes the following changes:
• Added information on hardware averaging to the ADC chapter.
• Updated the clocking examples in the I2C chapter.
• Added Serial Flash Loader usage information.
• Added “5-V-tolerant” description for GPIOs to feature list, GPIO chapter, and
Electrical chapter.
• Added maximum values for 20 MHz and 25 MHz parts to Table 9-1, “16-Bit
Timer with Prescaler Configurations” in the Timers chapter.
• Made the following changes in the System Control chapter:
- Updated field descriptions in the Run-Mode Clock Configuration
(RCC) register and the Device Identification 1 (DID1) register.
- Updated the internal oscillator clock speed.
- Added the Deep-Sleep Clock Configuration (DSLPCFG) register.
- Added bus fault information to the clock gating registers.
18
April 27, 2007
Preliminary