LM3S2965_0711 Datasheet, PDF (88/574 Pages) List of Unclassifed Manufacturers – Microcontroller

System Control
Bit/Field
11:8
7
6
5
4
3
2
1
0
Name
MAXADCSPD
MPU
HIB
TEMPSNS
PLL
WDT
SWO
SWD
JTAG
Type
RO
RO
RO
RO
RO
RO
RO
RO
RO
Reset
0x3
Description
Max ADC Speed
Indicates the maximum rate at which the ADC samples data.
Value Description
0x3 1M samples/second
1
MPU Present
When set, indicates that the Cortex-M3 Memory Protection Unit (MPU)
module is present. See the ARM Cortex-M3 Technical Reference Manual
for details on the MPU.
1
Hibernation Module Present
When set, indicates that the Hibernation module is present.
1
Temp Sensor Present
When set, indicates that the on-chip temperature sensor is present.
1
PLL Present
When set, indicates that the on-chip Phase Locked Loop (PLL) is
present.
1
Watchdog Timer Present
When set, indicates that a watchdog timer is present.
1
SWO Trace Port Present
When set, indicates that the Serial Wire Output (SWO) trace port is
present.
1
SWD Present
When set, indicates that the Serial Wire Debugger (SWD) is present.
1
JTAG Present
When set, indicates that the JTAG debugger interface is present.
88
November 30, 2007
Preliminary