VS1001K Datasheet, PDF (7/40 Pages) List of Unclassifed Manufacturers – MPEG AUDIO CODEC

VLSI
Solution ^y
DATASHEET
VS1001K
1. LICENSE
1 License
MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson.
2 Characteristics & Specifications
Unless otherwise noted: AVDD=2.9..3.6V, DVDD=2.3..3.6V, TA=-30..+85^◦C, XTALI=24.576MHz, Full-
Scale Output Sinewave at 1.526 kHz, measurement bandwidth 20..20000 Hz, analog output load 30Ω (no
ground buffer) or 100Ω (with ground buffer), bitstream 128 kbits/s, local components as shown in Figures
4 and 5.
Note, that some analog values are in practice better than in these tables if chips are used within a limited
temperature range and not too close to lower voltage limits.
2.1 Analog Characteristics
Parameter
Symbol Min Typ Max Unit
DAC Resolution
16
bits
Total Harmonic Distortion
THD
0.1 0.2 %
Dynamic Range (DAC unmuted, A-weighted)
IDR
90
dB
S/N Ratio (full scale signal)
SNR 70 87
dB
Interchannel Isolation
50 75
dB
Interchannel Gain Mismatch
-0.5
0.5 dB
Frequency Response
-0.1
0.1 dB
Frequency Response, AVDD = 2.8V
Full Scale Output Voltage (Peak-to-peak)
Deviation from Linear Phase
-0.3
0.3 dB
1.4 1.8¹ 2.0 Vpp
5^◦
Out of Band Energy
-60
dB
Out of Band Energy with Analog Filter
-90
dB
Analog Output Load Resistance, no ground buffer AOLR1 16 30²
Ω
Analog Output Load Resistance, ground buffer AOLR2 16 100²
Ω
Analog Output Load Capacitance
1000 pF
1 _{3.6 volts can be achieved with +-to-+ wiring for mono difference sound.}
2 _{AOLR1/2 may be much lower, but below Typical distortion performance may be compromised.}
Version 4.14, 2004-02-10
7