82C862 Datasheet, PDF (42/51 Pages) List of Unclassifed Manufacturers – FireLink USB Dual Controller Quad Port USB

FireLink USB
82C862
7
6
5
4
3
2
1
0
MEMOFST 5Ah
HcRhPort2Status Register - Byte 2
Default = 00h
Reserved
Port Reset
Status Change
0 = Port reset is
not
complete
1 = Port reset is
complete
Port Over-
current
Indicator
Change
This bit is set
when the Over-
current
Indicator
(MEMOFST
50h[1]) bit
changes.
Write 1 to clear
(1) If the Device Removable Bits (MEMOFST 4Ch[15:1]) are set, bit 0 resets to 1.
Port Suspend Port Enable Connect Status
Status Change Status Change
Change
Indicates the Indicates that Indicates a
completion of the port has connect or
the selective been disabled disconnect
resume
due to a
event has been
sequence for hardware event detected.
the port.
(cleared Port _{0 = No}
0 = Port is not ^{Enable Status,}
connect/dis
resumed ^MEMOFST
54h[1]).
1 = Port resume
connect
event
is complete
0 = Port has not
been
1 = Hardware
disabled
detection of
connect/dis
1 = Port Enable
connect
Status has
event(1)
been
cleared
Write 1 to clear
MEMOFST 5Bh
HcRhPort2 Status Register - Byte 3
Reserved
Default = 00h
®
Page 38
912-2000-030
Revision: 1.0