MC3510 Datasheet, PDF (10/75 Pages) List of Unclassifed Manufacturers – Pilot Motion Processor

Each device of the MC3000 family is a complete chip-based motion processor providing trajectory
generation and related motion control functions for one axis including pulse and direction output or
servo loop closure or on-board commutation where appropriate. This family of products provides a
software-compatible selection of dedicated motion processors that can handle a large variety of
system configurations.
The chip architecture not only makes it ideal for the task of motion control, it allows for similarities
in software commands, so software written for one motor type can be re-used if the motor type is
changed.
Pilot Family Summary
MC3110 – This single-chip, single-axis motion processor outputs motor commands in either
Sign/Magnitude PWM or DAC-compatible format for use with brushed servo motors, or with
brushless servo motors having external commutation.
MC3310 – This single-chip, single-axis motion processor outputs sinusoidally commutated motor
signals appropriate for driving brushless motors. Depending on the motor type, the output is a two-
phase or three-phase signal in either PWM or DAC-compatible format.
MC3410 – This single-chip, single-axis motion processor outputs microstepping signals for stepping
motors. Two phased signals per axis are generated in either PWM or DAC-compatible format.
MC3510 – This single-chip, single-axis motion processor outputs pulse and direction signals for
stepping motor systems.
MC3510 Technical Specifications
10