EN25QH128A Datasheet, PDF (43/75 Pages) Eon Silicon Solution Inc. – 128 Megabit Serial Flash Memory with 4Kbyte Uniform Sector

EN25QH128A
Figure 25. Write Suspend/Resume Flow
Note:
1. The ‘WIP’ can be either checked by command ‘05h’ polling.
2. ‘Wait for write cycle’ can be referring to maximum write cycle time or polling the WIP.
3. ‘Wait for suspend delay’ after issue program suspend command, latency time 20us is needed before
issue another command or polling the WIP.
4. The ‘WES’ and ‘WSE’ can be checked by command ‘2Bh’ polling.
5. ‘Suspend done’ means the chip can do further operations allowed by suspend spec.
This Data Sheet may be revised by subsequent versions
43
or modifications due to changes in technical specifications.
©2014 Eon Silicon Solution, Inc.,
Rev. C, Issue Date: 2014/01/22
www.eonssi.com