EPVP6200 Datasheet, PDF (8/57 Pages) ELAN Microelectronics Corp – VFD Controller

ePVP6200
VFD Controller
2.3 GPIO
GPIO 9 Port(8 bit): general purpose input/output; LED output ;interrupt function
GPIO C Port(8 bit): general purpose input/output for switch and key scanning (12x4
matrix)
2.4 VFD
Multiple display modes (9-segment & 19-digit to 20-segment & 8-digit)
External resistor not necessary for driver outputs.(P-ch open-drain + pull-down resistor
output)
2.5 POR
2.0V voltage detector for Power-on reset
2.6 PACKAGE
52-pin QFP
3 Application
VFD controller
2 of 57 11.18.2004 (V1.53)
This specification is subject to change without further notice.