EPVP6200 Datasheet, PDF (18/57 Pages) ELAN Microelectronics Corp – VFD Controller

ePVP6200
VFD Controller
7.2.5 R4 (RAM Selection For Common Registers R20 ~ R3F))
(RAM Selection Register)
Bit 7
Bit 6
Bit 5
RB1
R/W-0
RB0
R/W-0
RSR5
R/W
Bit 4
RSR4
R/W
Bit 3
RSR3
R/W
Bit 2
RSR2
R/W
Bit 1
RSR1
R/W
Bit 0
RSR0
R/W
Bit 0 ~ Bit 5 (RSR0 ~ RSR5) : Indirect address for common Registers R20 ~ R3F.
RSR bits are used to select up to 32 registers (R20 to R3F) in
the indirect address mode.
Bit 6 ~ Bit 7 (RB0 ~ RB1) :
Bank selection bits for common Registers R20 ~ R3F.
These selection bits are used to determine which bank is
activated among the 4 banks for 32 register (R20 to R3F).
Refer to Section 7.1 Operation Registers Configuration for
details.
7.2.6 R5 (PORT5 Output Data, Program Page Selection)
a) PAGE 0 (PORT5 Output Data Register for HV or General Purpose Input
pins:)
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
P57
P56
P55
P54
-
-
-
-
W-0
W-0
W-0
W-0
-
-
-
-
b) PAGE 1 (Program ROM Page Register)
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
-
-
-
-
-
-
-
R/W-0 R/W-0 R/W-0
Bit 2
PS2
R/W-0
Bit 1
PS1
R/W-0
Bit 0
PS0
R/W-0
Bit 0 ~ Bit 2 (PS0 ~ PS2) : Program page selection bits
PS2 PS1 PS0
000
001
010
011
100
101
110
111
Program Memory
Page (Address)
Page 0
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
PAGE instruction is used to select the program page to be accessed. The selected program
page is maintained by Elan compiler. PAGE instruction will change your program by inserting
the instruction within program.
12 of 57 11.18.2004 (V1.53)
This specification is subject to change without further notice.