EPVP6200 Datasheet, PDF (42/57 Pages) ELAN Microelectronics Corp – VFD Controller

ePVP6200
VFD Controller
The first 1 byte (b0 to b7) inputted to the ePVP6200 through the DIN pin after the STB pin has
fallen, is regarded as a command. Interrupt event will occur when STB pin is falling.
If STB mode is high while a command/data are being transmitted, serial communication is
initialized, and the command/data being transmitted is invalidated (however, the
command/data already transmitted remain valid).
36 of 57 11.18.2004 (V1.53)
This specification is subject to change without further notice.