DA9063_17 Datasheet, PDF (133/219 Pages) Dialog Semiconductor – System PMIC for Mobile Application Processors

DA9063
System PMIC for Mobile Application Processors
Register Address Bit Type
Label
Description
2
R/W
PMIF_DIS
0: Power manager interface not disabled
during power down
1: Auto-disable of power manager interface
during POWERDOWN mode
1
R/W
GPADC_PAUSE
0: ADC measurements continue during power
down as configured
1: Auto-PAUSE auto measurements on A0,
A1, A2 and A3 and manual measurement
during POWERDOWN mode; if no
autonomous auto-measurements are
required (VSYS from vibration motor driver)
switch off the ADC completely
0
R/W
GPI_DIS
0: GPIO extender enabled during power
down
1: Auto-disable of features configured as GPI
pins during POWERDOWN mode and force
the detection hidden transition when re-
enabling the pin
Note 1 When the related ID is configured to be 1 < PD_DIS_STEP ≤ MAX_COUNT the value of the above
controls define whether functions are switched on when entering POWERDOWN mode from POR or
wait until ID PD_DIS_STEP is processed.
A.2.2 GPIO Control
Table 78: GPIO0 to 1
Register Address Bit
0x15
7
GPIO0 to 1
Type
R/W
6
R/W
5:4 R/W
3
R/W
2
R/W
1:0 R/W
Label
GPIO1_WEN
GPIO1_TYPE
GPIO1_PIN
GPIO0_WEN
GPIO0_TYPE
GPIO0_PIN
Description
0: Passive to active transition triggers a
wakeup
1: Wakeup suppressed
0: GPI: active low
GPO: supplied from VDD_IO1
1: GPI: active high
GPO: supplied from VDD_IO2
PIN assigned to
00: ADCIN2/1.2 V comparator
01: GPI (optional regulator HW control)
10: GPO mode controlled (Open drain)
11: GPO mode controlled (Push-pull)
0: Passive to active transition triggers a
wakeup
1: Wakeup suppressed
0: GPI: active low
GPO: supplied from VDD_IO1
1: GPI: active high
GPO: supplied from VDD_IO2
PIN assigned to
00: ADCIN1
01: GPI
10: GPO mode controlled (Open drain)
11: GPO mode controlled (Push-pull)
Datasheet
CFR0011-120-00
DA9063_2v1
133 of 219
23-Mar-2017
© 2017 Dialog Semiconductor