LUPA-1300_09 Datasheet, PDF (6/32 Pages) Cypress Semiconductor – 1.3MPxl High Speed CMOS Image Sensor

LUPA-1300
Photo-voltaic response curve
Figure 2. Output voltage as a function of the number of electrons
As one can see from Figure 2, the output signal ranges
between 0 V to 1.1 V and is linear until around 800 mV. Note
Electrical specifications
Absolute maximum ratings
that the upper part of the curve (near saturation) is actually a
logarithmic response.
Table 4. Absolute maximum ratings
Symbol
Parameter
Value
Unit
V_DC
DC supply voltage
-0.5 to +7
V
V_IN
DC input voltage
0.5 to VDC + 0.5
V
V_OUT
DC output voltage
-0.5 to VDC + 0.5
V
I
DC current per pin; any single input or output. (see ± 50
mA
Table 7 for more exceptions)
T_STG
Storage temperature range.
-40 to 100
°C
T_L
Lead temperature (10 seconds soldering).
300
°C
Note
1. Absolute Ratings are those values beyond which damage to the device may occur.
Document Number: 38-05711 Rev. *C
Page 6 of 32
[+] Feedback