LUPA-1300_09 Datasheet, PDF (5/32 Pages) Cypress Semiconductor – 1.3MPxl High Speed CMOS Image Sensor

LUPA-1300
Features and general specifications
Table 3. Features and general specifications
Feature
Electronic shutter type
Windowing (ROI)
Read out sequence
Extended dynamic range
X clock
Number of outputs
Supply voltage VDD
Logic levels
Operational temperature range
Package
Specification/Description
Synchronous pipelined shutter with variable integration time.
Programmable via SPI.
Progressive scan.
Double slope extended dynamic range.
20 MHz (pixel rate of 40 MHz)
16.
Image core supply: Range from 3V to 6 V.
Analog supply: Nominal 5 V.
Digital: Nominal 5 V.
5V (digital supply)
0°C to 60°C, with degradation of dark current.
145-pins Pin Grid Array (PGA).
Spectral response curve
Figure 1. Spectral response curve
0.12
0.1
0.08
QE=10%
0.06
QE=15%
QE= 20%
0.04
LUPA-1300
0.02
0
400
500
600
700
800
900
1000
Wavelength (nm)
Figure 1 shows the spectral response characteristic. The
curve is measured directly on the pixels. It includes effects of
non-sensitive areas in the pixel, e.g. interconnection lines. The
sensor is light sensitive between 400 and 1000 nm. The peak
QE * FF is 15% approximately between 500 and 700 nm.
Document Number: 38-05711 Rev. *C
Page 5 of 32
[+] Feedback