AT24C01D_14 Datasheet, PDF (13/26 Pages) ATMEL Corporation – IC-Compatible (2-wire) Serial EEPROM

8. Electrical Specifications
8.1 Absolute Maximum Ratings
Temperature under Bias . . . . . . . . . .–55C to +125C
Storage Temperature . . . . . . . . . . . .–65C to +150C
Supply Voltage
with respect to ground . . . . . . . . . . . . –0.5V to +4.10V
Voltage on any pin
with respect to ground . . . . . . . . . –0.6V to V_CC + 0.5V
DC Output Current. . . . . . . . . . . . . . . . . . . . . . . 5.0mA
Functional operation at the “Absolute Maximum Ratings” or
any other conditions beyond those indicated in Section 8.2
“DC and AC Operating Range” is not implied or guaranteed.
Stresses beyond those listed under “Absolute Maximum
Ratings” and/or exposure to the “Absolute Maximum
Ratings” for extended periods may affect device reliability
and cause permanent damage to the device.
The voltage extremes referenced in the “Absolute Maximum
Ratings” are intended to accommodate short duration
undershoot/overshoot pulses that the device may be
subjected to during the course of normal operation and does
not imply or guarantee functional device operation at these
levels for any extended period of time.
8.2 DC and AC Operating Range
Operating Temperature (Case)
V_CC Power Supply
Industrial Temperature Range
Low Voltage Grade
AT24C01D and AT24C02D
–40C to +85C
1.7V to 3.6V
8.3 DC Characteristics
Parameters are applicable over the operating range in Section 8.2, unless otherwise noted.
Symbol Parameter
Test Condition
Min
Typical⁽¹⁾
Max
Units
V_CC
Supply Voltage
1.7
3.6
V
V_CC = 1.8V⁽²⁾ Read at 400kHz
I_CC1
Supply Current, Read
V_CC = 3.6V
Read at 1MHz
0.08
0.3
mA
0.15
0.5
mA
I_CC2
Supply Current, Write V_CC = 3.6V
Write at 1MHz
I_SB
Standby Current
V_CC = 1.8V⁽²⁾
V_CC = 3.6V
V_IN = V_CC or V_SS
0.20
1.0
mA
0.08
0.4
μA
0.10
0.8
μA
I_LI
Input Leakage Current V_IN = V_CC or V_SS
0.10
3.0
μA
I_LO
Output Leakage Current V_OUT = V_CC or V_SS
V_IL
Input Low Level⁽²⁾
V_IH
Input High Level⁽²⁾
0.05
3.0
μA
–0.6
V_CC x 0.7
V_CC x 0.3
V
V_CC + 0.5
V
V_OL1
Output Low Level
V_CC = 1.7V
I_OL = 0.15mA
0.2
V
V_OL2
Output Low Level
V_CC = 3.0V
I_OL = 2.1mA
0.4
V
Notes: 1. Typical values characterized at T_A = +25°C unless otherwise noted.
2. This parameter is characterized but is not 100% tested in production.
AT24C01D and AT24C02D [DATASHEET] 13
Atmel-8871B-SEEPROM-AT24C01D-02D-Datasheet_032014