AMC0XXDFLKA Datasheet, PDF (36/46 Pages) Advanced Micro Devices – 4, 8, 20, or 32 Megabyte 5.0 Volt-only Flash Memory PC Card

AC CHARACTERISTICS
Write/Erase/Program Operations
Card Speed
Parameter Symbol
JEDEC Standard
Parameter Description
-150 ns
Unit
Min Typ Max
t_AVAV
t_AVWL
t_WLAX
t_DVWH
t_WHDX
t_OEH
t_WHGL
t_GHWL
t_ELWL
t_WHEH
t_WLWH
t_WHWL
t_WHWH3
t_WC
t_AS
t_AH
t_DS
t_DH
t_WR
t_CS
t_CH
t_WP
t_WPH
Write Cycle Time
Address Setup Time
Address Hold Time
Data Setup Time
Data Hold Time
Output Enable Hold Time for Embedded Algorithm
Write Recovery Time before Read
Read Recovery Time before Write
CE Setup Time
CE Hold Time
Write Pulse Width
Write Pulse Width HIGH
Embedded Programming Operation (Notes 1, 2, 3)
150
20
20
50
20
0
6
20
0
20
45
50
8
ns
ns
ns
ns
ns
ns
µs
µs
ns
ns
ns
ns
µs
2
ms
t_WHWH4
Embedded Erase Operation for each 64K Byte Memory Sector
(Notes 1, 2)
15
s
t_VCS
V_CC Setup Time to CE LOW
50
µs
Notes:
1. Rise/Fall ≤ 10 ns.
2. Maximum specification not needed due to the devices internal stop timer that will stop any erase or write operation that exceed
the device specification.
3. Embedded Program Operation of 8 µs consist of 6 µs program pulse and 2 µs write recovery before read. This is the minimum
time for one pass through the programming algorithm. D5 = “1” only after a byte takes longer than 2 ms to Write.
36
AmC0XXDFLKA