AMC0XXDFLKA Datasheet, PDF (32/46 Pages) Advanced Micro Devices – 4, 8, 20, or 32 Megabyte 5.0 Volt-only Flash Memory PC Card

ABSOLUTE MAXIMUM RATINGS
Storage Temperature . . . . . . . . . . . . . –30°C to +70°C
Ambient Temperature
with Power Applied. . . . . . . . . . . . . . . . . 0°C to +70°C
Voltage at All Pins (Note 1) . . . . . . . . –0.5 V to +7.0 V
V_CC (Note 1). . . . . . . . . . . . . . . . . . . . –0.5 V to +6.0 V
Output Short Circuit Current (Note 2) . . . . . . . 40 mA
Notes:
1. Minimum DC voltage on input or I/O pins is –0.5 V. During
voltage transitions, inputs may overshoot V_SS to –2.0 V for
periods of up to 20 ns. Maximum DC voltage on output
and I/O pins is V_CC + 0.5 V. During voltage transitions,
outputs may overshoot to V_CC + 2.0 V for periods up to
20 ns.
2. No more than one output shorted at a time. Durations of
the short circuit should not be greater than one second.
Conditions equal V_OUT = 0.5 V or 5.0 V, V_CC = V_CC max.
These values are chosen to avoid test problems caused
by tester ground degradation. This parameter is sampled
and not 100% tested, but guaranteed by characterization.
Stresses above those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. This is
a stress rating only; functional operation of the device at these
or any other conditions above those indicated in the opera-
tional sections of this specification is not implied. Exposure of
the device to absolute maximum rating conditions for ex-
tended periods may affect device reliability.
OPERATING RANGES
Commercial (C) Devices
Case Temperature (T_C) . . . . . . . . . . . . . .0°C to +70°C
V_CC Supply Voltages . . . . . . . . . . . . +4.75 V to 5.25 V
Operating ranges define those limits between which the
functionality of the device is guaranteed.
32
AmC0XXDFLKA