AKD4673-A Datasheet, PDF (29/48 Pages) Asahi Kasei Microsystems – stereo CODEC with built-in MIC/HP amplifier and TSC

[AKD4673-A]
Control Software Manual For the Evaluation of TSC
„ Parallel Port Driver install
Attached software is the application software, which checks the function of the AK4673. Windows(R) Win 98, Win
2K, and Win XP are supported. However, to make it operate on Win2K and XP, it is necessary to install driver in
advance. Please follow a procedure with reference to DriverSetupe.pdf. Installation of a driver is unnecessary to use it
by the Windows 98 system.
„ Run the software (AK4673_TSC.exe)
This software valuates the function of the AK4673 TSC block. First match Port Address of your PC environment.
Measurements with pressed by pen or stylus on the touch panel are started when the start button is clicked after select
Channel Selection, MODE, and Power Down 0. A result will be displayed on AD OUT Section. When carrying out
position detection, the position where pen clicked on the touch panel is measured.
Operation can set up two control commands. Continuous operation can be performed. Each data (mean, max, and
min) is also displayed at the same time. PENIRQN can be seen by the break of a command.
<KM086000>
Figure 19. TSC control soft window
- 29 -
2007/5