AKD4673-A Datasheet, PDF (23/48 Pages) Asahi Kasei Microsystems – stereo CODEC with built-in MIC/HP amplifier and TSC

[AKD4673-A]
5. [Function3 Dialog]
The sequence of register setting can be set and executed.
(1) Click [F3] Button.
(2) Set the control sequence.
Set the address, Data and Interval time. Set “-1” to the address of the step where the sequence should be paused.
(3) Click [Start] button. Then this sequence is executed.
The sequence is paused at the step of Interval="-1". Click [START] button, the sequence restarts from the paused step.
This sequence can be saved and opened by [Save] and [Open] button on the Function3 window. The extension of file
name is “aks”.
Figure 13. Window of [F3]
<KM086000>
- 23 -
2007/5