AKD4683 Datasheet, PDF (10/74 Pages) Asahi Kasei Microsystems – AK4683 Evaluation Board Rev.1

ASAHI KASEI
[AKD4683-A]
3. 10-wire flat cable for interface to external
AK4683 can achieve the interface with external data source via PORT4 (PORTA), PORT5 (PORTB).
Connect PORT4 (PORTA) and external port or PORT5 (PORTB) and external port by 10-wire flat cable.
Take care of the direction of 10-pin connector and 10-pin header. (The red line side of 10-wire flat cable of 10-pin
connector should be connected to No.5pin and No.6pin of 10-pin header.)
3-1. PORT4 (for PORTA)

Pin layout of PORT4 (for PORTA) is shown in Figure 15.
1 ^PORT4 10
MCLK
GND
BICKA
MCKO
OLRCKA
SDTIA1
SDTOA
SDTIA2
ILRCKA
SDTIA3
5 PORTA 6
Figure 15. PORT4 (for PORTA)
3-2. PORT5 (for PORTB)

Pin layout of PORT5 (for PORTB) is shown in Figure 16.
1 ^PORT5 10
MCLK
GND
BICKB
MCKO
LRCKB
SDTIB
SDTOB
5 PORTB 6
Figure 16. PORT5 (for PORTB)
<KM077504>
- 10 -
2005/08