U1AFS250-FG256 Datasheet, PDF (2/27 Pages) Actel Corporation – 3 - DC and Power Characteristics

DC and Power Characteristics
Table 3-1 • Absolute Maximum Ratings (continued)
Symbol
Parameter
Commercial
Industrial
Units
Analog input (direct input to ADC)
–0.4 to 3.75
–0.4 to 3.75
V
Digital input
–0.4 to 12.6
–0.4 to 12.4
V
AG
Unpowered, ADC reset asserted or –11.0 to 12.6
unconfigured
–11.0 to 12.4
V
Low Current Mode (1 µA, 3 µA, 10 µA, 30 µA)
–0.4 to 12.6
–0.4 to 12.4
V
Low Current Mode (–1 µA, –3 µA, –10 µA, –30
µA)
High Current Mode³
–11.0 to 0.4
–11.0 to 12.6
–11.0 to 0.4
V
–11.0 to 12.4
V
AT
Unpowered, ADC reset asserted or
–0.4 to 16.5
unconfigured
–0.4 to 16.0
V
Analog input (+16 V, 4 V prescaler range)
–0.4 to 16.5
–0.4 to 16.0
V
Analog input (direct input to ADC)
–0.4 to 3.75
–0.4 to 3.75
V
Digital input
–0.4 to 16.5
–0.4 to 16.0
V
T_STG3
T_j3
Storage temperature
Junction temperature
–65 to +150
°C
+125
°C
Notes:
1. The device should be operated within the limits specified by the datasheet. During transitions, the input
signal may undershoot or overshoot according to the limits shown in Table 3-4 on page 3-4.
2. Analog data not valid beyond 3.65 V.
3. For flash programming and retention maximum limits, refer to Table 3-5 on page 3-5. For recommended
operating limits refer to Table 3-2 on page 3-3.
3-2
Preliminary v0.4