Z51F0811 Datasheet, PDF (8/52 Pages) Zilog, Inc. – The Z51F0811 Evaluation Board contains the following components

Z51F0811 Evaluation Kit
User Manual
1
Introduction
This manual describes how to set up Zilog’s Z51F0811 Evaluation Kit (Zilog part number
Z51F0811000KITG) and use it to evaluate your Z8051-based designs and applications.
The Kit features a small Evaluation Board consisting of four LEDs, three pushbuttons,
port pin headers and a UART-to-USB port. The Board features the Z51F0811 MCU in a
32-pin QFN package, plus a DBG connector to connect the board to a host development
PC using the Z8051 USB On-Chip Debugger (OCD) cable. For more details about the
Z51F0811 MCU, please refer to the Z51F0811 Product Specification (PS0296).
This document guides you through the following tasks:
• Install the Z8051 OCD Software and Documentation – see page 5
• Configure the Z8051 OCD and Z51F0811 Evaluation Board – see page 15
• Build and Run the Z51F0811 Demo Project – see page 17
Figure 1 displays an image of the Z51F0811 Evaluation Kit.
UM024205-1012
Figure 1. The Z51F0811 Evaluation Kit
Introduction