Z51F0811 Datasheet, PDF (10/52 Pages) Zilog, Inc. – The Z51F0811 Evaluation Board contains the following components

Z51F0811 Evaluation Kit
User Manual
3
• Microsoft Windows 7 (32-bit/64-bit)
Z51F0811 Evaluation Board Block Diagram
Figure 3 displays a block diagram of the Z51F0811 Evaluation Board.
USB Mini B
USB
USB to UART
interface
UART
Z 51F 0811
OCD
QUX
LEDs
Pushbuttons
Test points
Figure 3. Block Diagram of the Z51F0811 Evaluation Board
Z51F0811 Evaluation Board Description
The Z51F0811 Evaluation Board contains the following components:
• Z51F0811: U1, 32-pin QFN chip
• 3 LEDs: green (D1), red (D2) and yellow (D3) are connected to the GPIO pins of the
Z51F0811 MCU
• 1 green LED to indicate USB power: D4
• 3 pushbuttons:
– SW1: RESET
– SW2 and SW3 are connected to the GPIO pins on the Z51F0811 MCU
• USB connector: P1
• OCD connector: J1, J2
• USB to UART interface: U2
UM024205-1012
Introduction