Z51F0811 Datasheet, PDF (38/52 Pages) Zilog, Inc. – The Z51F0811 Evaluation Board contains the following components

Z51F0811 Evaluation Kit
User Manual
31
Note: This COM port can be determined from the Device Manager, as described in the the FTDI
USB-to-UART Driver Installation section on page 13.
2. Configure this port to reflect the following settings:
– 9600bps
– 8 data bits
– No parity
– 1 stop bit
– No flow control
3. Click the Call button to connect to the Z51F0811 Board. Upon connection, you should
be able to see the Demo program menu shown in Figure 29.
Figure 29. Demo Program Menu in HyperTerminal
At this point, you have successfully run the Z51F0811 demo project, but you are welcome
to continue evaluating the demo in HyperTerminal. For additional information about how
to create, edit, run and debug this project, please see the Z8051 Tools Product User Guide
UM024205-1012
Build and Run the Z51F0811 Demo Project