Z51F0811 Datasheet, PDF (12/52 Pages) Zilog, Inc. – The Z51F0811 Evaluation Board contains the following components

Z51F0811 Evaluation Kit
User Manual
5
Install the Z8051 OCD Software and
Documentation
The Z8051 On-Chip Debugger (OCD) interface is the interface by which your PC will
communicate with the Z51F0811 MCU to download and execute code. In addition to the
OCD, software such as development tools and sample applications will be installed.
Note: If you have already installed the Z8051 software and documentation from the CD-ROM
following the procedure on the paper insert in your kit (FL0138), skip this section and pro-
ceed to the Z8051 OCD Driver Installation section, below.
Observe the following procedure to install the Z8051 On-Chip Debugger software and
documentation on your computer.
1. Ensure that the OCD interface hardware is not connected to your PC.
2. Insert the Z8051 Software and Documentation CD into your computer’s CD-ROM
drive. The setup program launches automatically. If the setup program does not launch
automatically, open Windows Explorer, browse to your CD-ROM drive, and double-
click the file labeled Z8051_<version_number>.exe.
Note: In this filename, <version_number> refers to the version number of the OCD Software
and Documentation release. For example, this version number may be 1.0.
3. Follow the on-screen instructions to complete the OCD software installation.
Z8051 OCD Driver Installation
The driver programs for the Z8051 On-Chip Debugger are copied during the software and
documentation installation. In the following procedure for PCs running Windows 7 32-
and 64-bit operating systems, ensure that the target side of the OCD will remain uncon-
nected while you install these drivers.
Note: If you are running Windows Vista, see Appendix A. on page 37 to install your device driv-
ers. If you are running Windows XP, see Appendix B. on page 40.
UM024205-1012
Install the Z8051 OCD Software and Documentation