Z51F0811 Datasheet, PDF (50/52 Pages) Zilog, Inc. – The Z51F0811 Evaluation Board contains the following components

Z51F0811 Evaluation Kit
User Manual
43
Appendix C. Stand-Alone Flash
Programming Using the Keil µVision IDE
Observe the following procedure to program Flash memory without debugging.
1. From the Project menu, open the Options for Target 'your project’, and click the
Utilities tab. In the Use Target Driver for Flash Programming drop-down menu
within the Configure Flash Menu Command pane, ensure that Zilog Z8051 Target
Driver is selected, as indicated in Figure 37.
Figure 37. Selecting A Target Driver For Flash Programming
2. Click the Settings button to change any additional Flash options. The Settings dialog
will appear, as shown in Figure 38.
UM024205-1012
Stand-Alone Flash Programming Using the Keil µVision