Z02215 Datasheet, PDF (66/74 Pages) Zilog, Inc. – Single Chip Modem with Integrated Controller, Data Pump, and Analog Front End

Z02215
Single Chip Modem with Integrated Controller, Data Pump, and AFE
60
Power Requirements
The modem power and environmental requirements are indicated in Table 13 and
Table 14.
Table 13. Power Requirements
Voltage
Current Typical @ 25°C
Current Maximum @ 0°C
+5 V_DC, Operating
60mA
90mA
+5 V_DC, Sleep
10mA
25mA
Note: All voltages are ±5% DC. If a switching supply is used, the frequency may be between 20 kHz
and 150 kHz. However, it is recommended that no harmonics of the switching frequency
greater than 3mV rms be present on the analog supply pin of the chip.
Table 14. Environmental Requirements
Parameter
Ambient Temperature Under Bias
(Standard Temperature Range)
Extended Temperature
Storage Temperature
Voltage on any pin to V_SS
Power Dissipation
Soldering Temperature 10 sec
DC Characteristics
Value
0° C to +70° C
–40° C to +85° C
–55° C to +150° C
–0.3V to +7V
352mW
+230° C
Table 15. DC Characteristics
Parameter Description
Test Conditions Minimum
Pin Types I and I/O: Input and Input/Output
V_IH
Input High Voltage
2.0
V_IL
Input Low Voltage
-0.3
I_L
Input Leakage Current GND < V₀ < V_DD –
Pin Types O and IO: Output and Input/Output
V_OH
Output High Voltage
I_OH = –.20 mA 2.4
Typical
–
–
–
–
Maximum
V_CC +0.3
0.8
10
–
Units
V
V
µA
V
PS001907-0904
DC Characteristics