Z02215 Datasheet, PDF (65/74 Pages) Zilog, Inc. – Single Chip Modem with Integrated Controller, Data Pump, and Analog Front End

Z02215
Single Chip Modem with Integrated Controller, Data Pump, and AFE
59
Standard Test Conditions
The DC Parameters are be tested according to the DC Characteristics detailed in
Table 15. The Z02215 tester has active loads which are used to test the loading
for I_OH and I_OR.
Available Operating Temperature Range
Standard = 0°C to +70°C
Extended = –40°C to +85°C
Voltage Supply Range:
+4.5 V ≤ V_CC ≤ + 5.5 V
All AC parameters assume a load capacitance of 100 pF. Add 10 ns delay for
each 50 pF increase in load up to a maximum of 150 pF for the data bus and 100
pF for address and control lines.
PS001907-0904
Standard Test Conditions