Z86U18 Datasheet, PDF (28/30 Pages) Zilog, Inc. – USB Device Controller with CMOS Z86K15 MCU

Z86U18
USB Device Controller with CMOS Z86K15 MCU
ORDERING INFORMATION
6 MHz
40-Pin DIP
Z86U18PSC
6 MHz
44-Pin PLCC
Z86U18VSC
6 MHz
44-PIN QFP
Z86U18FSC
6 MHz
28-Pin DIP
Z86U18PSC
6 MHz
28-Pin SOIC
Z86U18SSC
For fast results, contact your Zilog sales office for assistance in ordering the part desired.
CODES
Package
P = Plastic DIP
V = Plastic Leaded Chip Carrier
F = Quad Flat Pack
Speed
06 = 6 MHz
Environment
C = Plastic Standard
Temperature
S = 0°C to +70°C
Example:
Z 86U18 05 P S C is a Z86U18, 6 MHz, DIP, 0°C to +70°C, Plastic Standard Flow
Environmental Flow
Temperature
Package
Speed
Product Number
Zilog Prefix
Zilog
© 1997 by Zilog, Inc. All rights reserved. No part of this
document may be copied or reproduced in any form or by
any means without the prior written consent of Zilog, Inc.
The information in this document is subject to change
without notice. Devices sold by Zilog, Inc. are covered by
warranty and patent indemnification provisions appearing
in Zilog, Inc. Terms and Conditions of Sale only. Zilog, Inc.
makes no warranty, express, statutory, implied or by
description, regarding the information set forth herein or
regarding the freedom of the described devices from
intellectual property infringement. Zilog, Inc. makes no
warranty of merchantability or fitness for any purpose.
Zilog, Inc. shall not be responsible for any errors that may
appear in this document. Zilog, Inc. makes no commitment
to update or keep current the information contained in this
document.
ZilogÕs products are not authorized for use as critical
components in life support devices or systems unless a
specific written agreement pertaining to such intended use
is executed between the customer and Zilog prior to use.
Life support devices or systems are those which are
intended for surgical implantation into the body, or which
sustains life whose failure to perform, when properly used
in accordance with instructions for use provided in the
labeling, can be reasonably expected to result in
significant injury to the user.
Zilog, Inc. 210 East Hacienda Ave.
Campbell, CA 95008-6600
Telephone [phone]
FAX [phone]
Internet: http://www.zilog.com
28
PRELIMINARY
DS97KEY0102