W25Q32FV Datasheet, PDF (81/99 Pages) Winbond – 3V 32M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI

W25Q32FV
9. ELECTRICAL CHARACTERISTICS
9.1 Absolute Maximum Ratings ⁽¹⁾⁽²⁾
PARAMETERS
Supply Voltage
Voltage Applied to Any Pin
Transient Voltage on any Pin
Storage Temperature
Lead Temperature
Electrostatic Discharge Voltage
SYMBOL
VCC
VIO
VIOT
TSTG
TLEAD ⁽³⁾
VESD⁽²⁾
CONDITIONS
Relative to Ground
<20nS Transient
Relative to Ground
Human Body Model
RANGE
–0.6 to 4.6
–0.6 to VCC+0.4
UNIT
V
V
–2.0V to VCC+2.0V V
–65 to +150
°C
See Note ⁽³⁾
°C
–2000 to +2000
V
Notes:
1.This device has been designed and tested for the specified operation ranges. Proper operation outside of these levels is not
guaranteed. Exposure to absolute maximum ratings may affect device reliability. Exposure beyond absolute maximum ratings may
cause permanent damage.
2.JEDEC Std JESD22-A114A (C1=100pF, R1=1500 ohms, R2=500 ohms).
3.Compliant with JEDEC Standard J-STD-20C for small body Sn-Pb or Pb-free (Green) assembly and the European directive on
restrictions on hazardous substances (RoHS) 2002/95/EU.
9.2 Operating Ranges
PARAMETER
SYMBOL CONDITIONS
Supply Voltage
Ambient Temperature,
Operating
VCC⁽¹⁾
TA
F_R = 104MHz,
Industrial
fR = 50MHz
SPEC
MIN MAX
2.7
3.6
–40 +85
UNIT
V
°C
Note:
1.VCC voltage during Read can operate across the min and max range but should not exceed ±10% of the programming
(erase/write) voltage.
- 80 -
Publication Release Date: Sept 16,, 2013
Revision H