W25Q32FV Datasheet, PDF (8/99 Pages) Winbond – 3V 32M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI

3.4 Pin Configuration SOIC 300-mil
W25Q32FV
Figure 1c. W25Q32FV Pin Assignments, 16-pin SOIC 300-mil (Package Code SF)
3.5 Pin Description SOIC 300-mil
PIN NO.
1
PIN NAME
/HOLD (IO3)
I/O
FUNCTION
I/O
Hold Input (Data Input Output 3)⁽²⁾
2
VCC
Power Supply
3
/RESET
I
Reset Input⁽³⁾
4
N/C
No Connect
5
N/C
No Connect
6
N/C
No Connect
7
/CS
I
Chip Select Input
8
DO (IO1)
I/O
Data Output (Data Input Output 1)⁽¹⁾
9
/WP (IO2)
I/O
Write Protect Input (Data Input Output 2)⁽²⁾
10
GND
Ground
11
N/C
No Connect
12
N/C
No Connect
13
N/C
No Connect
14
N/C
No Connect
15
DI (IO0)
I/O
Data Input (Data Input Output 0)⁽¹⁾
16
CLK
I
Serial Clock Input
Notes:
1. IO0 and IO1 are used for Standard and Dual SPI instructions
2. IO0 – IO3 are used for Quad SPI instructions, /WP & /HOLD (or /RESET) functions are only available for Standard/Dual SPI.
3. The /RESET pin on SOIC-16 package is independent of the HOLD/RST bit and QE bit settings in the Status Register. This pin
can be left floating, if Rest function is not needed.
-7-