W25Q32FV Datasheet, PDF (33/99 Pages) Winbond – 3V 32M-BIT SERIAL FLASH MEMORY WITH DUAL/QUAD SPI & QPI

W25Q32FV
During volatile Status Register write operation (50h combined with 01h/31h/11h), after /CS is driven high,
the Status Register bits will be refreshed to the new values within the time period of tSHSL2 (See AC
Characteristics). BUSY bit will remain 0 during the Status Register bit refresh period.
The Write Status Register instruction can be used in both SPI mode and QPI mode. However, the QE bit
cannot be written to when the device is in the QPI mode, because QE=1 is required for the device to
enter and operate in the QPI mode.
Refer to section 7.1 for Status Register descriptions.
Figure 9a. Write Status Register-1/2/3 Instruction (SPI Mode)
Figure 9b. Write Status Register-1/2/3 Instruction (QPI Mode)
- 32 -
Publication Release Date: Sept 16,, 2013
Revision H