|
ISD5100 Datasheet, PDF (70/88 Pages) Winbond – SINGLE-CHIP 1 TO 16 MINUTES DURATION VOICE RECORD/PLAYBACK DEVICES WITH DIGITAL STORAGE CAPABILITY | |||
|
◁ |
ISD5100 â SERIES
SDA
SCL
data line
stable;
data valid
changed
of data
allowed
Bit transfer on the I2C-Bus
Start and stop conditions
Both data and clock lines remain HIGH when the interface bus is not busy. A HIGH-to-LOW transition
of the data line while the clock is HIGH is defined as the start condition (S). A LOW-to-HIGH transition
of the data line while the clock is HIGH is defined as the stop condition (P).
SDA
SDA
SCL
S
START condition
P
STOP condition
SCL
System configuration
Definition of START and STOP conditions
A device generating a message is a âtransmitterâ; a device receiving a message is the âreceiverâ. Th
System Configuration
A device generating a message is a âtransmitterâ; a device receiving a message is the âreceiverâ. The
device that controls the message I sthe âmasterâ and the devices that are controlled by the master are
the âslavesâ.
- 70 -
|
▷ |