ISD5100 Datasheet, PDF (38/88 Pages) Winbond – SINGLE-CHIP 1 TO 16 MINUTES DURATION VOICE RECORD/PLAYBACK DEVICES WITH DIGITAL STORAGE CAPABILITY

WaitACK
WaitSCLHigh
SendByte(row%256) - low address byte
WaitACK
WaitSCLHigh
I2CStop
repeat until the number of RAC pulses are one less
than the number of rows to delete
{
wait RAC low
WAIT RAC high
}
Note: If only one row is going to be erased,
send the following STOP command immediately after
ERASE command and skip the loop above
I2CStart
SendByte(0x80)
WaitACK
WaitSCLHigh
SendByte(0xc0)
WaitACK
WaitSCLHigh
I2CStop
- Write, Slave address zero
- Stop digital erase
wait until erase of the last row has completed
{
wait RAC low
WAIT RAC high
}
I2CStart
SendByte(0x80)
WaitACK
- Write, Slave address zero
- 38 -
ISD5100 – SERIES