ISD5100 Datasheet, PDF (66/88 Pages) Winbond – SINGLE-CHIP 1 TO 16 MINUTES DURATION VOICE RECORD/PLAYBACK DEVICES WITH DIGITAL STORAGE CAPABILITY

ISD5100 – SERIES
AUX IN⁽¹⁴⁾
Symbol
V_{AUX IN}
V_{AUX IN (0TLP)}
A_{AUX IN (ANA OUT)}
A_{AUX IN (GA)}
A_{AUX IN (GT)}
R_{AUX IN}
Parameters
AUX IN Input Voltage
Min⁽²⁾
AUX IN (0TLP) Input
Voltage
Gain from AUX IN to ANA
OUT
AUX IN Gain Accuracy
-0.5
AUX IN Gain Tracking
AUX IN Input Resistance
Typ^(1)(14)
694.2
0 to +9
+/-0.1
10 to 100
Max⁽²⁾ Units Conditions
1.0
V Peak-to-Peak (0 dB
gain setting)
mV Peak-to-Peak (0 dB
gain setting)
dB 4 Steps of 3 dB
+0.5
dB (11)
dB 1000 Hz, +3 to –45
dB 0TLP Input, 0
dB setting
kΩ Depending on AUX
IN Gain
SPEAKER OUTPUTS⁽¹⁴⁾
Symbol
Parameters
V_SPHG
SP+/- Output Voltage (High
Gain Setting)
Min⁽²⁾
R_SPLG
R_SPHG
C_SP
SP+/- Output Load Imp. 8
(Low Gain)
SP+/- Output Load Imp. 70
(High Gain)
SP+/- Output Load Cap.
Typ^(1)(14)
150
Max⁽²⁾
3.6
Units
V
Ω
Conditions
Peak-to-Peak,
differential load =
150Ω,
OPA1,
OPA0 = 01
OPA1, OPA0 = 10
Ω OPA1, OPA0 = 01
100
pF
V_SPAG
V_SPDCO
SP+/- Output Bias Voltage
(Analog Ground)
Speaker Output DC Offset
ICN_{ANA IN/(SP+/-)}
C_RT_(SP+/-)/ANA
OUT
ANA IN to SP+/- Idle
Channel Noise
SP+/- to ANA OUT Cross
Talk
PSRR
Power Supply Rejection
Ratio
1.2
-55
- 66 -
VDC
+/-100
-65
-65
mV With ANA IN to
DC Speaker, ANA IN
AC coupled to V_SSA
dB Speaker Load =
150Ω^(12)(13)
dB 1 kHz 0TLP input to
ANA IN, with
MIC+/- and AUX IN
AC coupled to V_SS,
and measured at
ANA OUT feed
through mode ⁽¹²⁾
dB Measured with a 1
kHz, 100 mV p-p
sine wave input at