W25B40 Datasheet, PDF (26/36 Pages) Winbond – 4M-BIT SERIAL FLASH MEMORY WITH BOOT AND PARAMETER SECTORS

W25B40/W25B40A
9. ELECTRICAL CHARACTERISTICS
9.1 Absolute Maximum Ratings ⁽¹⁾
PARAMETERS
Supply Voltage
SYMBOL
VCC
Voltage Applied to Any Pin
Storage Temperature
VIO
TSTG
Lead Temperature
TLEAD
Electrostatic Discharge Voltage VESD
CONDITIONS
Relative to Ground
Human Body Model⁽³⁾
RANGE
–0.6 to +4.0
–0.6 to VCC +0.4
–65 to +150
See Note 2
–2000 to +2000
UNIT
V
V
°C
°C
V
Notes:
1 This device has been designed and tested for the specified operation ranges. Proper operation outside of these levels is not
guaranteed. Exposure beyond absolute maximum ratings (listed above) may cause permanent damage.
2. Compliant with JEDEC Standard J-STD-20C for small body Sn-Pb or Pb-free (Green) assembly and the European directive
on restrictions on hazardous substances (RoHS) 2002/95/EU..
3. JEDEC Std JESD22-A114A (C1=100 pF, R1=1500 ohms, R2=500 ohms).
9.2 Operating Ranges
PARAMETER
SYMBOL CONDITIONS
Supply Voltage⁽¹⁾
VCC
Ambient Temperature, TA
Operating
FR = 33MHz, fR = 25MHz
FR = 40MHz, fR = 25MHz
Industrial
SPEC
MIN
MAX
2.7
3.6
3.0
3.6
–40
+85
UNIT
V
V
°C
Note:
1. VCC voltage during Read can operate across the min and max range but should not exceed ±10% of the programming
(erase/write) voltage.
- 26 -