W83626F Datasheet, PDF (25/34 Pages) Winbond – LPC-to-ISA Bridge

LPC TO ISA BRIDGE SET
W83626F/W83626D
PRELIMINARY
REVISION NOTICES.
a. 4/16/1999 modified page 2, 3 to correct wrong typewrite and changed to Rev 0.02.
b. 5/18/1999 modified page 1,3 to define K/B functions , 80portCS# and IRQINX.Changed
ROMCS#from pin 39 to pin37.page 8,added and modified the function description and
changed to Rev0.03
c.5/27/1999 modified page 7 to add power-on setting function in DACK6# for entry port of
configure mode(HERFRA). In page 6,Master# was added RTCEN power-on setting function.
In page 8,80PCS# was added KBEN power-on setting function and GPIO 5 added a new
function IRQ8,GPIO6 added RTCCS#,and GPIO7 added IOHCS#.Rev 0.04 changed.
d.5/31/1999 Added Power-Down functin in islate#( page 5)and PLED function in GPIO3(page 8)
IRQIN2 was removed and IRQIN1 modified to IRQIN.
e.6/8/1999 Renamed ISOLATE# to PWRDN# and corrected RTCCS# decode address
(71,72--> 70,71),
f. 6/9/1999 modified the function descriptioin of pin 29.Rev 0.05 changed.
g.7/9/1999 Combined configuration register and modified new schematic.Rev 0.06.
h.7/21/1999 Modified default value of CR and add ed some descriptions and corresponding table.
Rev 0.07.
i. 8/24/1999 Modified recommended circuit and register descriptions. Corrected power-on setting
description of signal ROMCS# . Rev 0.10.
j.10/08/1999 modified pin configuration ,pin62 and 63.Rev 0.11
k. 11/16/1999 Modified schematic circuit and added the function description of CR43 and CR44. Rev
0.12.
l. 02/20/2000 Add new pacake 100-LQFP (W83626D) dimention
- 23 -
Publication Release Date: Feb 2000
Revision 0.50