TA1310ANG Datasheet, PDF (5/106 Pages) Toshiba Semiconductor – NTSC VIDEO, CHROMA, DEFLECTION, AND DISTORTION COMPENSATION IC (WITH YUV INTERFACE AND ACB)

PIN
No.
SYMBOL
FUNCTION
10 OSD Y_s IN The terminal for switching of
internal RGB signals and
Analog OSD RGB signals (Pin
7, 8, 9).
INTERFACE
TA1310ANG
I / O SIGNAL
11
ABL IN
The terminal for the external
unicolor and brightness
control.
ABL Gain and ABL start point
can be set by using BUS.
OPEN 6.0 V
12
VK OUT
The terminal outputs signal in
order to input in H-correction
(Pin 42).
The signal corresponds to
RGB signal.
13
R OUT
The terminals for RGB signal
output.
14
G OUT
15
B OUT
16
V_CC (9 V) The terminal for V_CC supply
9 V.
―
The terminals is connected to
9 V (typ.).
17
R Filter
Control the RGB output cutoff
voltage, holding the standard
18
G Filter
pulse period comparator
19
B Filter
output to one vertical period.
At ACB ON, the filters operate
so that the IK IN (pin 20)
voltage equals the value
determined by the bus (when
RBG cutoff : center, 1 V_p-p.)
The filters must be low
leakage current filters.
5
2005-09-20