TDA3MV_17 Datasheet, PDF (96/256 Pages) Texas Instruments – SoC for Advanced Driver Assistance Systems (ADAS) 15mm Package (ABF) Silicon Revision 2.0

TDA3MV, TDA3MA
TDA3LX, TDA3LA
SPRS964C – JUNE 2016 – REVISED JULY 2017
www.ti.com
Table 5-17. Thermal Resistance Characteristics (continued)
NO. PARAMET DESCRIPTION
ER
°C/W⁽¹⁾
AIR FLOW (m/s)⁽²⁾
T2 RΘ_JB
T3
Junction-to-board
Junction-to-free air
5.96
N/A
15.4
0
T4
T5
RΘ_JA
Junction-to-moving air
13.1
1
12.2
2
T6
11.6
3
T7
Junction-to-free air
0.94
0
T8
T9
Ψ_JT
Junction-to-package top
0.94
1
0.94
2
T10
0.94
3
T11
Junction-to-free air
5.12
0
T12
T13 ^ΨJB
Junction-to-board
4.78
1
4.63
2
T14
4.52
3
(1) These values are based on a JEDEC defined 2S2P system (with the exception of the Theta JC [RΘ_JC] value, which is based on a
JEDEC defined 1S0P system) and will change based on environment as well as application. For more information, see these
EIA/JEDEC standards:
– JESD51-2, Integrated Circuits Thermal Test Method Environment Conditions - Natural Convection (Still Air)
– JESD51-3, Low Effective Thermal Conductivity Test Board for Leaded Surface Mount Packages
– JESD51-6, Integrated Circuit Thermal Test Method Environmental Conditions - Forced Convection (Moving Air)
– JESD51-7, High Effective Thermal Conductivity Test Board for Leaded Surface Mount Packages
– JESD51-9, Test Boards for Area Array Surface Mount Packages
(2) m/s = meters per second
5.9 Analog-to-Digital ADC Subsystem Electrical Specifications
The analog-to-digital converter (ADC) module is a successive-approximation-register (SAR)
generalpurpose analog-to-digital converter.
The main features of the ADC include:
• 10-bit data.
• 8 general-purpose ADC channels.
• 750 KSPS at 13.5-MHz ADC_CLK.
• Programmable FSM sequencer.
• Support interrupts and status, with masking
Table 5-18 summarizes the ADC subsystem electrical specifications.
Table 5-18. ADC Electrical Specifications
PARAMETER
Analog Input
Full-scale Input Range
Vref
Differential Non-Linearity
(DNL)
Integral Non-Linearity (INL)
Gain Error
Offset Error
Input Sampling Capacitance
Input Frequency adc_in[7:0]
Signal-to-Noise Ratio (SNR)
CONDITIONS
Should be less than or equal to vdds_18v.
adc_vrefp = vdds_18v
adc_vrefp = vdds_18v
adc_vrefp = vdds_18v
Input Signal: 30 kHz sine wave at -0.5 dB
Full Scale
MIN
NOM
adc_vrefp
1.62
-1
±4
±3
3.2
0
50
MAX
vdds_18v
1
±2
5
30
UNIT
V
V
LSB
LSB
LSB
LSB
pF
kHz
dB
96
Specifications
Copyright © 2016–2017, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: TDA3MV TDA3MA TDA3LX TDA3LA