BQ24618_15 Datasheet, PDF (6/43 Pages) Texas Instruments – System Power Selector and Low

bq24618
SLUSA55B – OCTOBER 2010 – REVISED APRIL 2015
www.ti.com
7 Specifications
7.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) ^{(1) (2) (3)}
MIN
VCC, ACP, ACN, SRP, SRN, BATDRV, ACDRV, CE, STAT1,
STAT2, PG
–0.3
PH
–2
Voltage
VFB
–0.3
REGN, LODRV, ACSET, TS, TTC
–0.3
BTST, HIDRV with respect to GND
–0.3
VREF, ISET1, ISET2
–0.3
Maximum difference
voltage
ACP–ACN, SRP–SRN
–0.5
T_J Junction temperature
–40
T_stg Storage temperature
–55
MAX
33
36
16
7
39
3.6
0.5
155
155
UNIT
V
V
°C
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to GND if not specified. Currents are positive into, negative out of the specified terminal. Consult Packaging
Section of the data book for thermal limitations and considerations of packages.
(3) If the battery voltage in the application exceeds 16 V, a series resistor between the battery pack and VFB is required. The top resistor of
the resistor-divider on VFB satisfies this requirement.
7.2 ESD Ratings
V_(ESD) Electrostatic discharge
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾
Charged device model (CDM), per JEDEC specification JESD22-
C101 ⁽²⁾
VALUE
±2000
±500
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
UNIT
V
6
Submit Documentation Feedback
Product Folder Links: bq24618
Copyright © 2010–2015, Texas Instruments Incorporated