DS50EV401_15 Datasheet, PDF (4/19 Pages) Texas Instruments – DS50EV401 2.5 Gbps / 5.0 Gbps or 8.0 Gbps Quad Cable and Backplane Equalizer

DS50EV401
SNLS288E – JANUARY 2008 – REVISED MARCH 2013
www.ti.com
Absolute Maximum Ratings ⁽¹⁾⁽²⁾
Supply Voltage (V_DD)
LVCMOS Input Voltage
-0.5V to +4.0V
-0.5V + 4.0V
LVCMOS Output Voltage
-0.5V to 4.0V
CML Input/Output Voltage
-0.5V to 4.0V
Junction Temperature
+150°C
Storage Temperature
-65°C to +150°C
ESD Rating
HBM, 1.5 kΩ, 100 pF
>8 kV
Thermal Resistance
θ_JA, No Airflow
30°C/W
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating
Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions. Absolute
Maximum Numbers are specified for a junction temperature range of -40°C to +125°C. Models are validated to Maximum Operating
Voltages only.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office / Distributors for
availability and specifications.
Recommended Operating Conditions
Supply Voltage
V_DD to GND, or
V_DD to GND
Ambient Temperature
Min
2.375
3.0
-40
Typ
Max
Units
2.5
2.625
V
3.3
3.6
V
25
+85
°C
Electrical Characteristics
Over recommended operating supply and temperature ranges with default register settings unless other specified. ^{(1) (2)}
Symbol
Parameter
Conditions
Min
Typ
Max
Units
POWER
PD
Power Dissipation
3.3V Operation
Signal active, V_DD = 3.3V, 3.6V
No signal, V_DD = 3.3V, 3.6V
PD
Power Dissipation
2.5V Operation
Signal active, V_DD = 2.5V, 2.625V
No signal, V_DD = 2.5V, 2.625V
N
Supply Noise Tolerance
Up to 50 MHz
(3)
510
700
mW
100
mW
380
490
mW
30
mW
100
mV_P-P
LVCMOS / LVTTL DC SPECIFICATIONS
V_IH
High Level Input Voltage
V_IL
Low Level Input Voltage
V_OH
High Level Output Voltage
V_OL
Low Level Output Voltage
I_IH
Input High Current
I_IL
Input Low Current
3.3V Operation
2.0
2.5V Operation
1.6
-0.3
I_OH = -3mA, 3.3V Operation
2.4
I_OH = -3mA, 2.5V Operation
2.0
I_OL = 3mA
V_IN = V_DD, MODE pin (pull down)
V_IN = V_DD, EN pins (pull up)
-15
V_IN = 0V, MODE pin (pull down)
-15
V_IN = 0V, EN pins (pull up)
-40
V_DD
V
V_DD
V
0.8
V
V
V
0.4
V
+140
μA
+15
μA
+15
μA
μA
(1) Typical values represent most likely parametric norms at V_DD = 3.3V or 2.5V, T_A = 25°C., and at the Recommended Operation
Conditions at the time of product characterization and are not ensured.
(2) The Electrical Characteristics tables list ensured specifications under the listed Recommended Operating Conditions except as
otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and
are not ensured.
(3) Allowed supply noise (mV_P-P sine wave) under typical conditions.
4
Submit Documentation Feedback
Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: DS50EV401