 English |
|
|
|
|
|
|
|
| CC3220MOD Datasheet, PDF (36/82 Pages) Texas Instruments – SimpleLink Wi-Fi CERTIFIED Wireless Module Solution | |||
| |||
| ◁ |
CC3220MOD
SWRS206 â MARCH 2017
www.ti.com
(1) TI recommends using the lowest possible drive strength that is adequate for the applications. This recommendation minimizes the risk of
interference to the WLAN radio and reduces any potential degradation of RF sensitivity and performance. The default drive strength
setting is 6 mA.
GPIO Pins 25, 26, 42, and 44 (25°C)(1)
PARAMETER
TEST CONDITIONS
MIN
NOM
MAX
UNIT
CIN Pin capacitance
VIH High-level input voltage
VIL Low-level input voltage
IIH High-level input current
IIL Low-level input current
IL = 2 mA; configured I/O drive
strength = 2 mA;
2.4 V ⤠VDD < 3.6 V
IL = 4 mA; configured I/O drive
strength = 4 mA;
2.4 V ⤠VDD < 3.6 V
VOH High-level output voltage
IL = 6 mA; configured I/O drive
strength = 6 mA;
2.4 V ⤠VDD < 3.6 V
IL = 2 mA; configured I/O drive
strength = 2 mA;
2.3 V ⤠VDD < 2.4 V
IL = 2 mA; configured I/O drive
strength = 2 mA;
VDD = 1.85 V
IL = 2 mA; configured I/O drive
strength = 2 mA;
2.4 V ⤠VDD < 3.6 V
IL = 4 mA; configured I/O drive
strength = 4 mA;
2.4 V ⤠VDD < 3.6 V
VOL Low-level output voltage
IL = 6 mA; configured I/O drive
strength = 6 mA;
2.4 V ⤠VDD < 3.6 V
IL = 2 mA; configured I/O drive
strength = 2 mA;
2.3 V ⤠VDD < 2.4 V
IL = 2 mA; configured I/O drive
strength = 2 mA;
VDD = 1.85 V
IOH
High-level source
current, VOH = 2.4
2-mA drive
4-mA drive
6-mA drive
0.65 Ã VDD
â0.5
VDD Ã 0.2
VDD Ã 0.2
VDD Ã 0.2
VDD Ã 0.25
VDD Ã 0.35
1.5
2.5
3.5
7
pF
VDD + 0.5 V
V
0.35 Ã VDD
V
50
nA
50
nA
VDD Ã 0.8
VDD Ã 0.7
VDD Ã 0.7
V
VDD Ã 0.75
VDD Ã 0.7
V
mA
IOL
Low-level sink
current,
2-mA drive
4-mA drive
6-mA drive
1.5
2.5
mA
3.5
VIL nRESET
0.6
V
(1) TI recommends using the lowest possible drive strength that is adequate for the applications. This recommendation minimizes the risk of
interference to the WLAN radio and reduces any potential degradation of RF sensitivity and performance. The default drive strength
setting is 6 mA.
Pin Internal Pullup and Pulldown (25°C)
PARAMETER
IOH
Pullup current
(VDD = 3.0 V)
IOL
Pulldown current
(VDD = 3.0 V)
TEST CONDITIONS
MIN
NOM
MAX
UNIT
5
10
µA
5
µA
36
Specifications
Submit Documentation Feedback
Product Folder Links: CC3220MOD
Copyright © 2017, Texas Instruments Incorporated
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese