MSP430F4796IPZ Datasheet, PDF (28/89 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F47x
MIXED SIGNAL MICROCONTROLLER
SLAS629A -- MARCH 2009 -- REVISED APRIL 2009
electrical characteristics over recommended operating free-air temperature (unless otherwise
noted) (continued)
outputs -- Ports P1, P2, P3, P4, P5, and P6
PARAMETER
TEST CONDITIONS
MIN
MAX UNIT
I_{OH(max) =} --1.5 mA, V_{CC =} 2.2 V, See Note 1 V_CC--0.25
V_CC
V_OH High-level output voltage
I_{OH(max) =} --6 mA,
I_{OH(max) =} --1.5 mA,
V_{CC =} 2.2 V,
V_{CC =} 3 V,
See Note 2
See Note 1
V_CC--0.6
V_CC--0.25
V_CC
V
V_CC
I_{OH(max) =} --6 mA,
V_{CC =} 3 V,
See Note 2
V_CC--0.6
V_CC
I_{OL(max) =} 1.5 mA,
V_{CC =} 2.2 V, See Note 1
V_SS V_SS+0.25
V_OL Low-level output voltage
I_{OL(max) =} 6 mA,
I_{OL(max) =} 1.5 mA,
V_{CC =} 2.2 V,
V_{CC =} 3 V,
See Note 2
See Note 1
V_SS V_SS+0.6
V
V_SS V_SS+0.25
I_{OL(max) =} 6 mA,
V_{CC =} 3 V,
See Note 2
V_SS V_SS+0.6
NOTES: 1. The maximum total current, I_OH(max) and I_OL(max), for all outputs combined, should not exceed ±12 mA to satisfy the maximum
specified voltage drop.
2. The maximum total current, I_OH(max) and I_OL(max), for all outputs combined, should not exceed ±48 mA to satisfy the maximum
specified voltage drop.
output frequency
PARAMETER
f_(Px.y)
(x = 1, 2, 3, 4, 5, 6, 0 ≤ y ≤ 7)
f_(MCLK)
P1.1/TA0/MCLK
t_(Xdc)
Duty cycle of output frequency
TEST CONDITIONS
C_L = 20 pF,
I_L = ±1.5 mA
V_{CC =} 2.2 V / 3 V
C_L = 20 pF
P1.1/TA0/MCLK,
C_L = 20 pF,
V_CC = 2.2 V / 3 V
f_(MCLK) = f_(XT1)
f_(MCLK) = f_(DCOCLK)
MIN TYP
DC
40%
50%--
50%
15 ns
MAX UNIT
f_System
f_System
60%
50%+
15 ns
MHz
MHz
28
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265