DS90CR216A Datasheet, PDF (17/34 Pages) Texas Instruments – 3.3-V Rising Edge Data Strobe LVDS Receiver

www.ti.com
8 Application and Implementation
DS90CR216A, DS90CR286A, DS90CR286A-Q1
SNLS043H – MAY 2000 – REVISED JANUARY 2016
NOTE
Information in the following applications sections is not part of the TI component
specification, and TI does not warrant its accuracy or completeness. TI’s customers are
responsible for determining suitability of components for their purposes. Customers should
validate and test their design implementation to confirm system functionality.
8.1 Application Information
The DS90CR286A and DS90CR216A are designed for a wide variety of data transmission applications. The use
of serialized LVDS data lines in these applications allows for efficient signal transmission over a narrow bus
width, thereby reducing cost, power, and space.
8.2 Typical Applications
LVDS Cable or PCB Trace
DS90CR286A 28-Bit Rx
LVDS Data
RxOUT[27:0]
24-Bit RGB Display Unit
Graphics Processor Unit (GPU)
28-Bit Tx Data
(4 LVDS Data, 1 LVDS Clock)
LVDS Clock
RxCLK
PLL
Figure 19. Typical DS90CR286A Application Block Diagram
LVDS Cable or PCB Trace
LVDS Data
DS90CR216A 21-Bit Rx
RxOUT[20:0]
18-Bit RGB Display Unit
Graphics Processor Unit (GPU)
21-Bit Tx Data
(3 LVDS Data, 1 LVDS Clock)
LVDS Clock
RxCLK
PLL
Figure 20. Typical DS90CR216A Application Block Diagram
Copyright © 2000–2016, Texas Instruments Incorporated
Submit Documentation Feedback
17
Product Folder Links: DS90CR216A DS90CR286A DS90CR286A-Q1