|
CC2420 Datasheet, PDF (7/92 Pages) List of Unclassifed Manufacturers – 2.4 GHz IEEE 802.15.4 / ZigBee-ready RF Transceiver | |||
|
◁ |
CC2420
3 Features
⢠2400 â 2483.5 MHz RF Transceiver
⢠Direct Sequence Spread
Spectrum (DSSS) transceiver
⢠250 kbps data rate, 2 MChip/s
chip rate
⢠O-QPSK with half sine pulse
shaping modulation
⢠Very low current consumption
(RX: 18.8 mA, TX: 17.4 mA)
⢠High sensitivity (-95 dBm)
⢠High adjacent channel rejection
(30/45 dB)
⢠High alternate channel rejection
(53/54 dB)
⢠On-chip VCO, LNA and PA
⢠Low supply voltage (2.1 â 3.6 V)
with on-chip voltage regulator
⢠Programmable output power
⢠I/Q low-IF soft decision receiver
⢠I/Q
direct
up-conversion
transmitter
⢠Separate transmit and receive FIFOs
⢠128 byte transmit data FIFO
⢠128 byte receive data FIFO
⢠Very few external components
⢠Only reference crystal and a
minimised number of passives
⢠No external filters needed
⢠Easy configuration interface
⢠4-wire SPI interface
⢠Serial clock up to 10 MHz
⢠802.15.4 MAC hardware support:
⢠Automatic preamble generator
⢠Synchronisation
word
insertion/detection
⢠CRC-16 computation and
checking over the MAC payload
⢠Clear Channel Assessment
⢠Energy detection / digital RSSI
⢠Link Quality Indication
⢠Full automatic MAC security
(CTR, CBC-MAC, CCM)
⢠802.15.4 MAC hardware security:
⢠Automated security operations
within the receive and transmit
FIFOs.
⢠CTR mode encryption / decryption
⢠CBC-MAC authentication
⢠CCM encryption / decryption and
authentication
⢠Stand-alone AES encryption
⢠Development tools available
⢠Fully equipped development kit
⢠Demonstration board reference
design with microcontroller code
⢠Easy-to-use software for
generating the CC2420 configu-
ration data
⢠Small size QLP-48 package, 7 x 7 mm
⢠Complies with EN 300 328, EN 300
440 class 2, FCC CFR47 part 15 and
ARIB STD-T66
SWRS041B
Page 7 of 89
|
▷ |