English
Language : 

DS110RT410 Datasheet, PDF (6/40 Pages) Texas Instruments – DS110RT410 Low Power Multi-Rate Quad Channel Retimer
DS110RT410
SNLS460 – MAY 2013
www.ti.com
Electrical Characteristics
Over recommended operating supply and temperature ranges with default register settings unless otherwise specified. (1)
Symbol
Parameter
Conditions
Min
Typ
Max
Units
POWER
PD
Power Supply Consumption
Average Power Consumption (2)
660
mW
Max Transient Power Supply Current
(3)
500
610
mA
NTPS
Supply Noise Tolerance (4)
2.5V LVCMOS DC SPECIFICATIONS
50 Hz to 100 Hz
100 Hz to 10 MHz
10 MHz to 5.0 GHz
100
mVP-P
40
mVP-P
10
mVP-P
VIH
High Level Input Voltage
VIL
Low Level Input Voltage
VOH
High Level Output Voltage
IOH = -3mA
VOL
Low Level Output Voltage
IOL = 3mA
IIN
Input Leakage Current
VIN = VDD
VIN = GND
IIH
Input High Current (EN_SMB pin)
VIN = VDD
IIL
Input Low Current (EN_SMB pin)
VIN = GND
3.3V LVCMOS DC SPECIFICATIONS (SDA, SDC, INT)
1.75
GND
VDD
V
0.7
V
2.0
V
0.4
V
+10
μA
-10
μA
+55
μA
-110
μA
VIH
High Level Input Voltage
VIL
Low Level Input Voltage
VOL
Low Level Output Voltage
IIH
Input High Current
IIL
Input Low Current
fSDC
SMBus clock rate
DATA BIT RATES
VDD = 2.5 V
VDD = 2.5 V
IPULLUP = 3mA
VIN = 3.6 V, VDD = 2.5 V
VIN = GND, VDD = 2.5 V
1.75
GND
+20
-10
100
3.6
V
0.7
V
0.4
V
+40
μA
+10
μA
400
KHz
RB
Bit Rate Range
SIGNAL DETECT
8.5
11.3
Gbps
SDH
Signal Detect ON Threshold Level Default differential input signal level to
70
assert signal detect, 10.3125 Gbps,
PRBS-31
mVp-p
SDL
Signal Detect OFF Threshold Level Default differential input signal level to
10
de-assert signal detect, 10.3125 Gbps,
PRBS-31
mVp-p
(1) Typical values represent most likely parametric norms at VDD = 2.5V, TA = 25°C., and at the Recommended Operation Conditions at the
time of product characterization.
(2) VDD= 2.5V, TA = 25°C. All four channels active and locked.
(3) Maximum power supply current during lock acquisition. All four channels active, all four channels unlocked, all registers at default
settings.
(4) Allowed supply noise (mVP-P sine wave) under typical conditions.
6
Submit Documentation Feedback
Product Folder Links: DS110RT410
Copyright © 2013, Texas Instruments Incorporated