TMS320DM6441_08 Datasheet, PDF (44/232 Pages) Texas Instruments – Digital Media System-on-Chip

TMS320DM6441
Digital Media System-on-Chip
SPRS359D – SEPTEMBER 2006 – REVISED MARCH 2008
www.ti.com
SIGNAL
NAME
COUT1/
B4/
BTSEL1
COUT2/
B5/
EM_WIDTH
COUT3/
B6/
DSP_BT
COUT4/
B7
COUT5/
G2
COUT6/
G3
COUT7/
G4
YOUT0/
G5/
AEAW0
YOUT1/
G6/
AEAW1
YOUT2/
G7/
AEAW2
YOUT3/
R3/
AEAW3
YOUT4/
R4/
AEAW4
YOUT5/
R5
YOUT6/
R6
YOUT7/
R7
GPIO0/
LCD_OE
GPIO2/
G0
GPIO3/
B0/
LCD_FIELD
GPIO4/
R0/
C_FIELD
GPIO5/
G1
GPIO6/
B1
GPIO38/
R1
PWM1/
R2/
GPIO46
Table 3-20. VPBE Terminal Functions (continued)
NO.
TYPE⁽¹⁾ OTHER⁽²⁾⁽³⁾
DESCRIPTION
B16
I/O/Z
IPD
DV_DD18
This pin is multiplexed between ARM boot mode and the VPBE.
After reset, this pin is either video encoder outputs COUT1, or
RGB666/888 Blue output data bits 4, B4.
A17
I/O/Z
IPD
DV_DD18
This pin is multiplexed between EMIFA and the VPBE.
After reset, it is video encoder output COUT2 or RGB666/888 Blue output
data bit 5 B5.
B17
I/O/Z
IPD
DV_DD18
This pin is multiplexed between DSP boot and the VPBE.
After reset, it is video encoder output COUT3 or RGB666/888 Blue data bit
6 output B6.
A18
O
DV_DD18 Video encoder output COUT4 or RGB666/888 Blue data bit 7 output B7.
B18
O
DV_DD18 Video encoder output COUT5 or RGB666/888 Green data bit 2 output G2.
B19
O
DV_DD18 Video encoder output COUT6 or RGB666/888 Green data bit 3 output G3.
C16
O
DV_DD18 Video encoder output COUT7 or RGB666/888 Green data bit 4 output G4.
D15
I/O/Z
IPD
DV_DD18
D16
I/O/Z
IPD
DV_DD18
D17
I/O/Z
IPD
DV_DD18
These pins are multiplexed between EMIFA and the VPBE.
After reset, these are video encoder outputs YOUT[0:4] or RGB666/888
Red and Green data bit outputs G5, G6, G7, R3, and R4.
D18
I/O/Z
IPD
DV_DD18
E15
I/O/Z
IPD
DV_DD18
E16
O
DV_DD18 Video encoder output YOUT5 or RGB666/888 Red data bit 5 output R5.
E17
O
DV_DD18 Video encoder output YOUT6 or RGB666/888 Red data bit 6 output R6.
E18
O
DV_DD18 Video encoder output YOUT7 or RGB666/888 Red data bit 7 output R7.
C13
I/O/Z
DV_DD18
This pin is multiplexed between GPIO and the VPBE.
In VPBE mode, it is the LCD output enable LCD_OE.
D13
I/O/Z
DV_DD18
This pin is multiplexed between GPIO and the VPBE.
In VPBE mode, it is RGB888 Green data bit 0 output G0.
This pin is multiplexed between GPIO, and the VPBE.
C14
I/O/Z
DV_DD18 In VPBE mode, it is RGB888 Blue data bit 0 output B0.
or LCD interlaced output LCD_FIELD.
B14
I/O/Z
DV_DD18
This pin is multiplexed between GPIO, the VPFE, and the VPBE.
In VPBE mode, it is RGB888 Red data bit 0 output R0.
E14
I/O/Z
DV_DD18
This pin is multiplexed between GPIO and the VPBE.
In VPBE mode, it is RGB888 Green data bit 1 output G1.
A14
I/O/Z
DV_DD18
This pin is multiplexed between GPIO and the VPBE.
In VPBE mode, it is RGB888 Blue data bit 1 output B1.
D14
I/O/Z
DV_DD18
This pin is multiplexed between VPBE and GPIO.
In VPBE mode, it is RGB888 Red output data bit 1.
B15
I/O/Z
DV_DD18
This pin is multiplexed between PWM1, VPBE, and GPIO.
In VPBE mode, it is RGB888 Red output bit 2 (R2).
44
Device Overview
Submit Documentation Feedback