MSP430F2618-EP Datasheet, PDF (35/92 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F2618- EP
MIXED SIGNAL MICROCONTROLLER
SLAS632 -- DECEMBER 2008
electrical characteristics over recommended ranges of supply voltage and operating free-air
temperature (unless otherwise noted) (continued)
SVS (supply voltage supervisor/monitor)
PARAMETER
TEST CONDITIONS
MIN TYP
MAX UNIT
t_(SVSR)
t_d(SVSon)
t_settle
V_(SVSstart)
V_{hys(SVS_IT--)}
dV_CC/dt > 30 V/ms (see Figure 12)
dV_CC/dt  30 V/ms
SVSON, switch from VLD = 0 to VLD  0, V_CC = 3 V
VLD  0^‡
VLD  0, V_CC/dt  3 V/s (see Figure 12)
V_CC/dt  3 V/s (see Figure 12)
V_CC/dt  3 V/s (see Figure 12),
External voltage applied on A7
5
20
VLD = 1
VLD = 2 to 14
70
V_{(SVS_IT--)} 
0.004
VLD = 15
4.4
150
s
2000
150 s
12 s
1.55
1.7 V
120
210 mV
V_{(SVS_IT--)} 
0.016
V
20 mV
VLD = 1
VLD = 2
1.8 1.9
2.05
1.94 2.1
2.25
VLD = 3
VLD = 4
2.05 2.2
2.37
2.14 2.3
2.48
VLD = 5
VLD = 6
2.24 2.4
2.6
2.33 2.5
2.71
V_{(SVS_IT--)}
V_CC/dt  3 V/s (see Figure 12 and Figure 13)
VLD = 7
VLD = 8
VLD = 9
VLD = 10
2.46 2.65
2.58 2.8
2.69 2.9
2.83 3.05
2.86
3V
3.13
3.29
V_CC/dt  3 V/s (see Figure 12 and Figure 13),
External voltage applied on A7
VLD = 11
VLD = 12
VLD = 13
VLD = 14
VLD = 15
2.94 3.2
3.11 3.35
3.24 3.5
3.43 3.7^†
1.1 1.2
3.42
3.61^†
3.76^†
3.99^†
1.3
I_CC(SVS)
(see Note 1)
VLD  0, V_CC = 2.2 V/3 V
10
15 A
† _{The recommended operating voltage range is limited to 3.6 V.}
‡ _{tsettle is the settling time that the comparator o/p needs to have a stable level after VLD is switched VLD  0 to a different VLD value between}
2 and 15. The overdrive is assumed to be > 50 mV.
NOTE 1: The current consumption of the SVS module is not included in the I_CC current consumption data.
 POST OFFICE BOX 655303 DALLAS, TEXAS 75265
35