MSP430F2618-EP Datasheet, PDF (12/92 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430F2618- EP
MIXED SIGNAL MICROCONTROLLER
SLAS632 -- DECEMBER 2008
interrupt flag register 1 and 2
Address
7
6
02h
5
4
3
2
1
0
NMIIFG
RSTIFG PORIFG
OFIFG
WDTIFG
rw--0
rw--(0)
rw--(1)
rw--1
rw--(0)
WDTIFG
OFIFG
PORIFG
RSTIFG
NMIIFG
Address
03h
Interrupt Flag Register 1
Set on watchdog timer overflow or security key violation
Reset on V_CC power-on or a reset condition at the RST/NMI pin in reset mode.
Flag set on oscillator fault7
Power-on interrupt flag. Set on V_CC power up.
External reset interrupt flag. Set on a reset condition at RST/NMI pin in reset mode. Reset
on V_CC power up.
Set via RST/NMI pin
7
6
5
4
3
2
1
0
UCB0TX
IFG
UCB0RX
IFG
UCA0TX
IFG
UCA0RX
IFG
rw--1
rw--0
rw--1
rw--0
UCA0RXIFG
UCA0TXIFG
UCB0RXIFG
UCB0TXIFG
Interrupt Flag Register 2
USCI_A0 receive interrupt flag
USCI_A0 transmit interrupt flag
USCI_B0 receive interrupt flag
USCI_B0 transmit interrupt flag
Legend
rw:
rw -0,1:
rw -(0,1)
Bit can be read and w ritten .
Bit can be read and w ritten . It is Reset or Set by PUC .
Bit can be read and w ritten . It is Reset or Set by POR .
SFR bit is not present in device .
12
 POST OFFICE BOX 655303 DALLAS, TEXAS 75265