DRV5013_15 Datasheet, PDF (18/27 Pages) Texas Instruments – DRV5013 Digital-Latch Hall Effect Sensor

DRV5013
SLIS150C – MARCH 2014 – REVISED SEPTEMBER 2014
9.2.3 Application Curves
OUT
www.ti.com
OUT
R1 = 10 kΩ pull-up
No C2
Figure 19. 10-kHz Switching Magnetic Field
0
R1 = 10-kΩ pull-up
C2 = 680 pF
Figure 20. 10-kHz Switching Magnetic Field
-2
-4
-6
-8
-10
-12
-14
100
1000
10000
Frequency (Hz)
R1 = 10-kΩ pull-up
C2 = 680 pF
Figure 21. Low-Pass Filtering
100000
D011
10 Power Supply Recommendations
The DRV5013 device is designed to operate from an input voltage supply (VM) range between 2.5 V and 38 V. A
0.01-µF (minimum) ceramic capacitor rated for V_CC must be placed as close to the DRV5013 device as possible.
18
Submit Documentation Feedback
Product Folder Links: DRV5013
Copyright © 2014, Texas Instruments Incorporated