TMS320DM647_10 Datasheet, PDF (1/181 Pages) Texas Instruments – Digital Media Processor

TMS320DM647
TMS320DM648
www.ti.com
SPRS372F – JANUARY 2010 – REVISED SEPTEMBER 2009
TMS320DM647/TMS320DM648 Digital Media Processor
Check for Samples: TMS320DM647, TMS320DM648
1 Features
1
• High-Performance Digital Media Processor
– 720-MHz, 800-MHz, 900-MHz, 1.1-GHz
C64x+™ Clock Rates
– 1.39 ns (-720), 1.25 ns (-800), 1.11 ns (-900),
0.91 ns (-1100) Instruction Cycle Time
– 5760, 6400, 7200, 8800 MIPS
– Eight 32-Bit C64x+ Instructions/Cycle
– Fully Software-Compatible With C64x/Debug
– Commercial Temperature Ranges (-720, -900,
and -1100 only)
– Extended Temperature Ranges (-800 only)
– Industrial Temperature Ranges (-720, -900,
and -1100 only)
• VelociTI.2™ Extensions to VelociTI™
Advanced Very-Long-Instruction-Word (VLIW)
TMS320C64x+™ DSP Core
– Eight Highly Independent Functional Units
With VelociTI.2 Extensions:
• Six ALUs (32-/40-Bit), Each Supports
Single 32-bit, Dual 16-bit, or Quad 8-bit
Arithmetic per Clock Cycle
• Two Multipliers Support Four 16 x 16-bit
Multiplies (32-bit Results) per Clock Cycle
or Eight 8 x 8-bit Multiplies (16-Bit
Results) per Clock Cycle
– Load-Store Architecture With Non-Aligned
Support
– 64 32-bit General-Purpose Registers
– Instruction Packing Reduces Code Size
– All Instructions Conditional
– Additional C64x+™ Enhancements
• Protected Mode Operation
• Exceptions Support for Error Detection
and Program Redirection
• Hardware Support for Modulo Loop
Auto-Focus Module Operation
• C64x+ Instruction Set Features
– Byte-Addressable (8-/16-/32-/64-bit Data)
– 8-bit Overflow Protection
– Bit-Field Extract, Set, Clear
– Normalization, Saturation, Bit-Counting
– VelociTI.2 Increased Orthogonality
– C64x+ Extensions
• Compact 16-bit Instructions
• Additional Instructions to Support
Complex Multiplies
• C64x+ L1/L2 Memory Architecture
– 256K-bit (32K-byte) L1P Program RAM/Cache
[Direct Mapped]
– 256K-bit (32K-byte) L1D Data RAM/Cache
[2-Way Set-Associative]
– 2M-bit/256K-byte (DM647) or
4M-Bit/512K-byte) (DM648) L2 Unified
Mapped RAM/Cache [Flexible Allocation]
• Supports Little Endian Mode Only
• Five Configurable Video Ports
– Providing a Glueless I/F to Common Video
Decoder and Encoder Devices
– Supports Multiple Resolutions/Video
Standards
• VCXO Interpolated Control Port (VIC)
– Supports Audio/Video Synchronization
• External Memory Interfaces (EMIFs)
– 32-Bit DDR2 SDRAM Memory Controller With
512M-Byte⁽¹⁾ Address Space (1.8-V I/O)
– Asynchronous 16-Bit Wide EMIF (EMIFA)
• Up to 128M-Byte Total Address Reach
• 64M-Byte Address Reach per CE Space
– Glueless Interface to Asynchronous
Memories (SRAM, Flash, and EEPROM)
– Synchronous Memories (SBSRAM and ZBT
SRAM)
– Supports Interface to Standard Sync Devices
and Custom Logic (FPGA, CPLD, ASICs,
etc.)
• Enhanced Direct-Memory-Access (EDMA)
Controller (64 Independent Channels)
• 3-Port Gigabit Ethernet Switch Subsystem
• Four 64-Bit General-Purpose Timers (Each
Configurable as Two 32-Bit Timers)
• One UART (With RTS and CTS Flow Control)
• One 4-wire Serial Port Interface (SPI) With Two
Chip-Selects
• Master/Slave Inter-Integrated Circuit (I2C
Bus™)
• Multichannel Audio Serial Port (McASP)
– Ten Serializers and SPDIF (DIT) Mode
(1) From Silicon revision 1.1 and onward. In silicon revision 1.0,
the address space is 256M-Bytes.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010–2009, Texas Instruments Incorporated