LSM303D Datasheet, PDF (45/52 Pages) STMicroelectronics – Embedded temperature sensor

LSM303D
Register description
8.35
IG_SRC2 (35h)
This register contains the status for the inertial interrupt generator 2.
Table 74. IG_SRC2 register
0
IA
ZH
ZL
YH
YL
XH
XL
Table 75. IG_SRC2 register description
Interrupt generator 2 status. Default value: 0
IA
(0: no interrupt has been generated; 1: one or more interrupts have been generated)
Z high. Default value: 0
ZH
(0: no interrupt; 1: Z high event has occurred)
Z low. Default value: 0
ZL
(0: no interrupt; 1: Z low event has occurred)
Y high. Default value: 0
YH
(0: no interrupt; 1: Y high event has occurred)
Y low. Default value: 0
YL
(0: no interrupt; 1: Y low event has occurred)
X high. Default value: 0
XH
(0: no interrupt; 1: X high event has occurred)
X low. Default value: 0
XL
(0: no interrupt; 1: X low event has occurred)
Reading at this address clears the IG_SRC2 (35h) IA bit (and the interrupt signal on the
corresponding interrupt pin) and allows the refresh of data in the IG_SRC2 (35h) register if
the latched option was chosen.
8.36
IG_THS2 (36h)
Table 76. IG2_THS2 register
0
THS6
THS5
THS4
THS3
THS2
THS1
THS0
THS[6:0]
Table 77. IG2_THS2 register description
Interrupt generator 2 threshold. Default value: 000 0000
8.37 IG_DUR2 (37h)
Table 78. IG_DUR2 register
0
D6
D5
D4
D3
D2
D1
D0
DocID023312 Rev 2
45/52
52